Canon Pixma TS8320 Printer Setup

 Lift the Canon Pixma TS8320 printer from the printer box.

Check if the following components are present inside the box.

  • Power cord
  • Ink tanks
  • Setup CD-ROM
  • Safety and important information
  • Getting Started

Take the protective materials and the orange tape from the printer. Also, remove all the orange tapes inside the scanner unit.

The one end of the power cord has to be attached to the rear side of the Pixma TS8320 printer.

The other end of the power cord needs to be attached to the electrical socket.

Lift the operation panel cover of the printer and hold the ON button. This will turn on the printer.

Set the printer’s language from the displayed language list and touch the Yes option followed by the OK option.

Lift-open the Canon printer’s scanning unit cover. Once you peel off the tape and film from the new ink tank, remove its orange cap and insert it into the ink slot.

Press the black ink tank to fit it into its slot properly. Do the above-mentioned steps again to install the cyan, magenta, and yellow ink tanks in their slots.

After closing the printer’s scanning unit cover, tap the OK option on the touch screen panel of the printer.

Pull the cassette tray out from the printer, move the paper guides, and place some plain paper.

Place the cassette tray back into the printer and tap OK Next Next OK.

Go to the official Canon website and download the Canon Pixma TS8320 printer’s setup file.

Make sure to establish a connection between the computer and the printer.

Location: United States

Comments

Post a Comment

Popular posts from this blog

IJ Start Canon Pixma TS3122 Setup

 First, remove the protective tape that is present on top of your printer’s carton. Take all the components such as software disk and power cable out of the package. Lift the Canon PIXMA TS3122 printer from the box and keep it on a dust free surface. Find the power port on your printer and then attach the power cable. The other end of the power cable must be plugged into a wall outlet that is functioning properly. Force press the ON button to power Up your printer. Now, set all the preferences on the printer’s touch display. Open the rear tray or cassette on your printer, place enough white papers, and then close it. Install the original black and color cartridges into the respective slots. Print an alignment sheet to ensure that you have inserted the cartridges correctly.
Read more

ij start canon tr4520 Printer is Offline

 Ensure that you have connected the Canon PIXMA TR4520 printer to a working source. If the printer is in the Off state, use the Power button for turning it On. Print the Network Settings report and confirm that the model of your Canon printer and the personal computer are connected over the same network. Make sure to keep the system and the printer in a location nearby your wireless access point. Restore the network communication by power cycling the wireless router and the Canon PIXMA TR4520 printer. Ascertain that you disable the Use Printer Offline mode if a Windows personal computer is used. Confirm whether the print job is sent to the appropriate printer. Also, ensure that your Canon PIXMA is used as the default printer.
Read more

Canon Pixma Ts3120 Printhead Cleaning

 Cleaning: Change the printer from sleep mode to the active state. On the printer’s control panel, tap the Setup icon. Ensure that you do not move to the next step until the three lights display on the LCD panel. Touch the Black or Color icon on the printer’s operation panel. Check if the printer begins to clean the printhead. If the ON lamp starts to flash, the cleaning process is complete. Never try to print from the printer until the cleaning process completes. It may take about 1 to 2 minutes. ij start canon Pixma ts3120 Print. Printing is the main feature of the Canon Pixma TS3120 printer. Carry out the procedure provided below to complete the process.
Read more