Fix Canon Pixma TS3122 Network Problems

 To fix Network Communication problems, perform the troubleshooting methods given below.


If you are unable to find your printer on the Network, then follow the steps given below.

Search the printer using the Automatic search method. The Automatic Search option is available in the Search for Printers screen.

In the Check Printer Settings screen click the Redetect option and look for your printer by entering the IP address on the Search for Printers screen.

If you are unable to proceed with the communication process beyond the Printer Connection, then disconnect all the power cables from your printer and computer.

Leave them disconnected for a while. Reconnect the power cables and turn on your computer and printer.

Now, check the network status. If the Network status is good, then try a test print, scan, or fax operation on your Canon Pixma TS3122 Setup.

Comments

Post a Comment

Popular posts from this blog

IJ Start Canon Pixma TS3122 Setup

 First, remove the protective tape that is present on top of your printer’s carton. Take all the components such as software disk and power cable out of the package. Lift the Canon PIXMA TS3122 printer from the box and keep it on a dust free surface. Find the power port on your printer and then attach the power cable. The other end of the power cable must be plugged into a wall outlet that is functioning properly. Force press the ON button to power Up your printer. Now, set all the preferences on the printer’s touch display. Open the rear tray or cassette on your printer, place enough white papers, and then close it. Install the original black and color cartridges into the respective slots. Print an alignment sheet to ensure that you have inserted the cartridges correctly.
Read more

ij start canon tr4520 Printer is Offline

 Ensure that you have connected the Canon PIXMA TR4520 printer to a working source. If the printer is in the Off state, use the Power button for turning it On. Print the Network Settings report and confirm that the model of your Canon printer and the personal computer are connected over the same network. Make sure to keep the system and the printer in a location nearby your wireless access point. Restore the network communication by power cycling the wireless router and the Canon PIXMA TR4520 printer. Ascertain that you disable the Use Printer Offline mode if a Windows personal computer is used. Confirm whether the print job is sent to the appropriate printer. Also, ensure that your Canon PIXMA is used as the default printer.
Read more

Canon Pixma Ts3120 Printhead Cleaning

 Cleaning: Change the printer from sleep mode to the active state. On the printer’s control panel, tap the Setup icon. Ensure that you do not move to the next step until the three lights display on the LCD panel. Touch the Black or Color icon on the printer’s operation panel. Check if the printer begins to clean the printhead. If the ON lamp starts to flash, the cleaning process is complete. Never try to print from the printer until the cleaning process completes. It may take about 1 to 2 minutes. ij start canon Pixma ts3120 Print. Printing is the main feature of the Canon Pixma TS3120 printer. Carry out the procedure provided below to complete the process.
Read more